▊Method for selecting safety controller
Please follow the steps to select the suitable GC series products according to the purpose.  | ||
![]()  | ![]()  | ![]()  | 
| Selection of main controller [required] | Selection of expansion unit [option]  | Selection of bus gateway [option] | 
  |    | ![]()  | 
SPC-1000  | SPC-SIO8 SPC-SIO12 | SPC-WG | 
| ▊ | Bus gateway | 
  | • It is a bus-type gateway slave device. • Used in conjunction with the safety control modules  | 
▊Attachment specification
product name  | model  | communication method  | 
gateway  | SPC-PN  | PROFINET  | 
gateway  | SPC-MOD  | Modbus  | 
gateway  | SPC-EIP  | Ethernet/IP  | 
gateway  | SPC-ECAT  | Ether CAT  | 
gateway  | SPC-CAN  | Canopen  | 
▊ Technical parameter
model  | SPC-WG  | 
power indicator  | off:Module is power-off  | 
on:Module is power-on  | |
Backplane bus indicator  | on:Backplane bus communication is normal.  | 
Blinking:The connection is normal, with some modules offline in the system.  | |
Flickering:Gateway module is offline  | |
Bus operation indicator  | off:No connection established with the master station.  | 
on:Successful connection with the master station.  | |
ERR indicator  | off:No error (indicator is off)  | 
on:System error (indicator is on)  | |
LiLink/Act  | off:No EtherCAT connection  | 
on: Connection is normal,no data.  | |
Flash: Data is being transmitted  | 
▊Gateway accessory specification
product name  | Product selection  | use  | 
DIN rail bus connector  | SPC-TBUS  | A bus connector used to connect the housing of electronic modules, one is required for each module.  | 
Limit switch  | SPC-E  | A set of two is standard, which is used to fix the module and prevent the module from loosening.  | 
▊SPC-WG functional block diagram, typical application and outline dimension diagram
| Functional block diagram | DIN rail bus connector SPC-TBUS outline dimension diagram | Limit switch SPC-E outline dimension diagram | 
![]()  | 
 
  | 
 
  | 
▊安全模块配置· 自检参数可自由配置· 检测T口可自由选择· 通讯参数可自由配置· 通用Type-C组态线
▊安全控制器的选型方法请按步骤,根据用途选择适合的 GC 系列产品。主控制器的选择[必需]扩展单元的选择[选购件]总线网关的选择[必需] SPC-1000SPC-SIO8 SPC-SIO12SPC-WG▊SPC-SIO8安全扩展模块· 是一款安全扩展模块· 最大支持2路支持TTL型/正余弦型编码器信号......
• 是总线型网关从站设备 • 支持Modbus、EtherCAT、PROFINET、 EtherNet/IP、CANopen等通讯 • 配合安全控制模块使用 • 通过网关设备,用户可实时读取安全控制模 块的逻辑状态信息、设备运行状态信息以及 各IO模块的故障报警状态等,实现远程通信,方便操作▊型号......
				Lihong Safety Equipment Engineering (Shanghai) Co., Ltd.
E-Mail: info@lh-safety.com
Address: 581 Xiuchuan Road, Chuansha Town, Pudong New District, Shanghai
(Greenland East Coast International Plaza-Room A 313)
Copyright © Lihong Safety Equipment Engineering (Shanghai) Co., Ltd. ICP19034341-1 Technical Support: lanjujing